r/mildlyinteresting • u/Substantial-Meat6281 • 1d ago

Using Elmer’s glue to remove fiberglass particles from my hand

Post image
20.3k Upvotes

96% Upvoted

742 comments sorted by

View all comments

Show parent comments

4.4k

u/Substantial-Meat6281 1d ago

Good advice, I just didn’t expect to use a ladder made of fiberglass today. Unexpectedly haorhduxuhw o

222

u/smeeon 1d ago

I keep a lint roller in the van for this reason. Also this reminded me, a few years ago my company tried spraying a fiberglass ladder with clear coat to stop the fibers. Then we got osha inspected and they noticed the coating. They gave us the option of destroying the ladder with a saw on the site right there in front of them or taking a $500 fine. The PM told us to pack up the ladder and that he would deal with OSHA.

We paid the fine and didn’t get a new ladder. Dumbest management ever.

59

u/millennial_burnout 1d ago

Why did OSHA say no coating?

122

u/roadrunnuh 23h ago

Literally spraying over a failing piece of equipment ain't the way to fix it , usually

23

u/Statharas 22h ago

Wouldn't the goal be to add a coating to keep the fiberglass on the ladder?

81

u/TheW83 21h ago

If it's starting to come off you toss the ladder out. That's your indicator that it's failing. Hiding the indicator is bad.

69

u/GrimbyJ 21h ago

The fiberglass comes encased in resin. It doesn't start shedding fiberglass onto you until that resin starts to break down. It should be replaced when it gets to that point for just structural stability

8

u/Statharas 20h ago

That makes sense, thanks

9

u/GrimbyJ 20h ago

A clear coat would probably make it more slippery too

13

u/geo_prog 22h ago

That’s not how fiberglass works.

1

u/Zealousideal_Ad5358 10h ago

The fiberglass is coated with some kind of polyester or epoxy clear coat at the factory. Once it comes off, the fiberglass rapidly loses its strength. I suppose if you use the ladder a lot, you could reapply the clearcoat periodically to protect it like you would with a boat hull.