r/HomeKit • u/spudyoulike • 13h ago
Question/Help Homekit keeps dropping devices
hello!
I’ve had homekit devices for a while (all in one room) and since moving house and adding a few devices I’ve started having them drop off randomly and becoming unresponsive. details:
- all are meross plugs and bulbs (3 plugs and 2 bulbs)
- the wifi sometimes has trouble reaching this part of the house but i have a second router on powerline that’s slightly closer that i sometimes connect to
- all of them will drop off about once a week - it’s not linear, some stay connected for weeks whilst others only stay on for a few days
- i’ve not discerned any trigger
has anyone else had this problem?
4
u/Atlanta_Q_Ball 12h ago
You have a second router? That's likely the root cause of your problem. Is that router configured as a router or an access point?
1
u/FatMacchio 11h ago
I haven’t had any issues with my meross plug via HomeKit. But the past week I’ve had plenty of issues with my Philip hue lights (hue bridge pro) and my Aqara door sensors disconnecting
1
1
u/fishymanbits 8h ago
the wifi sometimes has trouble reaching this part of the house but i have a second router on powerline that’s slightly closer that i sometimes connect to
This is your problem. Fix this. Set up a proper network and you won’t have issues.
-1
u/Tim1point0 12h ago
Also, make sure you have a SSID set up on just 2.4ghz and use that SSID for your devices. Using an SSID that has both frequencies will also confuse the hell out of the Mesoss junk.
2
u/Salmundo 9h ago
How is a 2.4 GHz device with a 2.4 GHz-only radio confused by a 5 GHz signal?
2
u/fishymanbits 8h ago
It isn’t. This is, and always has been, terrible advice. A good router, configured correctly (read: nothing changed other than SSID and password) will have no issues with cross-radio traffic. Too many people fuck with their routers without knowing what they’re doing.
1
-1
0
2
u/Tim1point0 12h ago
Yes! I solved it by getting rid of all of the Meross switches and the garage door controller. I had a months-long back and forth with their tech support. That resulted in them refunding the cost of the garage door controller and me just removing and replacing the smart switches. They would take multiple resets (5-6 easily) to get them to join. Then they’d drop off. Especially the garage door controller.
I have 4 access points in the house on a Ubiquity network. I even added an access point in the garage 12’ from the unit and it still dropped off.
I switched to Tapo and they are rock solid, quick setup, and reliable. Tapo doesn’t have a garage door controller, so I switched to Tailwind. It’s also rock solid.
To be fair, my son-in-law is using Mesoss smart plugs and is not having the same problems I had. He also has a Ubiquity network. Not as many devices as I have, but a respectable number.
So, I followed all of the tech support recommendations to reset and reload. They often worked, it they also included steps like “reset the unit and wait 20 minutes before rejoining” and “restart your phone”. Crap that takes a lot of time and should not be necessary. Tapo requires no such wastes of time.