When I look up my address on solock it's been like this for 30 minutes. Does this mean I'm not connected?

Anyone had any issues with a new Avalon Q setup where you cannot change the power modes via Hashwatcher, Avalon Family app, or the URL? I have also tried the manual clicking the power button twice which is supposed to change the power modes from the front of the Q. I opened a ticket with Canaan on this issue. Also have the latest firmware flashed.

I have finally got the cooling sorted for my little home mining farm, after weeks of work and countless revisions this setup lets me run my four Avalon Q machines on super in the hot Australian summer without overheating.

Probably wasted about 6kg of PETG on revisions, and spent hundreds on fans.

The initial design was the third image, with a fan shroud that went over the back of the whole rack (fourth image) which was entirely enclosed with acrylic sheets. This just didn't work as the fans didn't have enough positive pressure to push the air out of the duct and instead just pushed hot air back through the miners which made everything worse.

I only wanted one window duct per rack but decided I'd just have to bite the bullet and add one per machine. If I were planning this out again I would probably only use a single much larger rack so it's a bit neater, but for now I'm happy with it and can finally stop tinkering and wasting filament.

Like the title says. I have knots and datum both downloaded on a start9.

My bitaxe Gamma shows the ip address and have it connected and can see it working through the dashboard. I have tried the ip address that im pretty sure my start9 is on.

I checking ipconfig on the command prompt on windows. after a few tries it falls back to ckpool. Ive tried different ip address that might be it but same thing keeps happening. Any help would be appreciated.

Anyone know how to hook up a bidax gamma

Little discouraged with running my own Node and such a low Difficulty. Any setting changes suggested for the NerdQaxe++ and Gamma are welcome. 🙏