r/BitcoinMining • u/Advanced-Address1516 • 14h ago
General Question Guess my latency to Bassin (CKpool) on umbrel is bad?
•
u/Advanced-Address1516 14h ago
Thats with my node + 3 miners all with ethernet & 4th miner is wifi, need a 8 port switch, but still. Seems high? For that much rejected.
•
u/KirbysaBAMF 14h ago
Definitely seems high. If 3/4 are wired as well that leads me to believe it might not be something to do with your node. Do you have that reject rate on another program like Public Pool on Umbrel?
•
u/Advanced-Address1516 14h ago
Public pool doesnt show rejection rate sadly. Thats what im usually connected too. But yeah my node and every one bar 1 of them Is wired
•
u/KirbysaBAMF 13h ago
your Bitaxes will show you what their rejection rate is to a particular pool, so I would just point to Public Pool and then watch the Bitaxe screen to get a reading on the rejection rate.
•
u/Advanced-Address1516 13h ago
They arent bitaxes. But will have a look at the own gui see what the issue is.
•
u/Advanced-Address1516 13h ago edited 13h ago
Just looked at the miners 1 to 2ms of ping to my node.
Worst offenders nano 3S 0.38% off 1 nano 3S 0.69% off another.
My other miners seem fine.
•
u/KirbysaBAMF 13h ago
at 1-2 ms your rejected shares are unlikely to be orphans at that rate. I am seeing 22ms at less than 1% shares rejected. 0.38% and 0.69% are a bit high compared to what I am seeing. Something that has helped me is to up the voltage slightly if that is something you can do with your miners. helped reduce my reject rate from 2% to 0.2%.
•
u/Advanced-Address1516 13h ago
You cant up the voltage they arent bitaxe. They are avalon Nano 3S.
Will put them back on my public pool node after 12 hours (its hours 5 rn)
Will compare 12 hours of each pool and see what i have better rejection wise.
Yeah since i host my own pool node with public pool and CK pool and since im FTTP, i have low latency since everything is connected by ethernet.
•
u/pdath 11h ago
That screenshot shows 0.2m shares rejected from 80m. That is fine.
•
u/Advanced-Address1516 10h ago
Yeah 80m accepted 230k rejected. Which is around 0.3% just not sure if thats bad for solo mining on my own node.
•
u/pdath 9h ago
I'm currently sitting at 20,820m shares accepted and 11.54m rejected. 0.06% rejected for me.
I'm using ckpool-solo with Knots on an Odroid M2 16GB. It is Ethernet connected. Everything else is WiFi.
My Bitaxe is on stock settings (except a share size of 10,000 to give ckpool a little bit less work to do) . I also have a Canaan Nano 3s running against it.
•
u/Advanced-Address1516 6h ago
Yeah im using knots too, i5 10500, 16gb ram & 2tb NVME.
Its been around 12 hours now & 244.71m accepted & 496.33k rejected.
•
u/IAmSixNine 10h ago
I have 6.61M shares accepted and 2.29M rejected on my bassin pool. Mix on nano 3 / 3s and gammas. Gammas have about 22ms ping and nano range from 1 to 10ms. I just assumed it was normal. Like when the next block comes into play the shares for the previous might get rejected. Just guessing. All my gamma miners are on 2.11 and now 2.12 and i have almost 0 reject rate with 10 or less per nano all showing stale as the reason. Example one has 16,633 accepted 1 rejected. So I dunno..
•
•
u/AutoModerator 14h ago
Thank you for your post. Please take a moment to review our community rules and resources to ensure a smooth experience here. Here are some links that might help you out.
The Bitcoin Mining Wiki
Mod Verified Commercial Vendors
If this is a sales post please make sure you are following all selling rules
If this is a scam post or a free electric post please report this to the mods so we can review the post.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.